Seppi Agriculture - Feature logos & advantages

Most SEPPI M. mulchers have had this feature since the beginning. The logo identifies machines with spiral-arranged tools or hammers on the rotor shaft. This results in impressively smooth running, low power requirements, reduced noise, and, last but not least, top-quality results

All four direction bearings installed on the support roller, capable of withstanding the weight of our equipment and absorb the side load during turns or while working sideways on slopes. Extended roller-bearing life, for heavy duty applications.

This is the adjustable rear hood of a hammer mulcher. With the variable and continuously adjustable mulching deflector, the opening can always be adjusted to obtain optimal work according to the material to be shredded while at the same time minimising power absorption

All mulchers and forestry tillers equipped with replaceable wear plates inside the chassis are marked with the WEARPLATE logo. The wear plates are always made of wear-resistant AR400 steel. Although the plates have a very long service life, it may be necessary to replace them after a certain period of time in applications involving heavy wear. This is quick and easy to do, and your machine will be as good as new.

What many people don’t know is that the actual mulching work in a mulcher is done by the counter cutters. Depending on the model and application, more or fewer counter cutters are installed in the chassis and sometimes also under the hood, always with a view to optimum mulching and optimum power requirements. COUNTER CUTTERS from SEPPI M. are made of drop-forged steel; They are shaped in such a way that they perform very well in mulching and also have a very long service life.

The symbol S420 indicates that the main components of the machine are made of a special steel. This steel is particularly tough and resistant to fatigue, which can occur during heavy-duty use, even in the area of weld seams. This high-strength steel is often used in combination with wear inserts.

Mulchers with a double mounting frame can be driven both at the front and at the rear, as indicated by the FR logo. A wide variety of combinations are possible: pushed at the front, pulled at the rear or even pushed at the rear. More details can be found in our technical documentation.

FLEX-SAFE is a system that protects the mulchers from damage caused by collisions with obstacles such as stones or roots. For example, it allows the SMO avs or L9 flex side mulchers to flexibly absorb shocks and thus avoid overloading both on the mulcher itself and on the tractor. This makes working at high speed possible without compromising safety.

A parallelogram lateral displacement has the advantage of allowing a large displacement in the required situations. This allows reaching of the most difficult points, for example under the canopy of trees, in ditches or on slopes. Greater reach is the key to easier and safer work.

Collecting material is one of the most difficult tasks for pick-up mulchers. Seppi M.'s technical solution uses nature as its model. The pick-up device replicates the shape of human fingers and thus ensures a perfect grip on the cut timber and branches.

The acronym RIC stands for "Radial Interference Cut". It is a patented system that obtains fine and even shredding without the need for sieving plates. The secret is that the material is radially pressed against the counter blades, where it is crushed by the overlapping tips of the tools. The use is especially important for pick-up mulchers, i.e. for tasks that require a particularly fine chopping result.

With the PENTALINK system, tools that generate very high side loads, such as the SBM, SBM tele and L9 flex, can be attached to the tractor. To ensure stable and safe working, the tools are connected to the tractor at five points with the PENTALINK system: 3 points as usual and 2 additional points on the tractor axle. The lift retains 100% of its functionality for any other attachment.

Highly sensitive hydraulic toucher, that senses the plants along a row in orchards or vineyards. This guides the implement along to ensure the cleanest possible job, without damaging or stressing the plants.

The FLOAT floating device allows the mulcher to oscillate so that it can freely follow the contour of the ground. With just one bolt, the floating device can be locked at any time if conditions so require.

Print Sitemap
© ArborAgri Ltd

Web View Mobile View

Logout Edit page